Hostname: page-component-7b7567c8c-tnzcf Total loading time: 0 Render date: 2026-11-14T06:16:03.150Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of a Silver Based Stable Current Collector for Solid Oxide Fuel Cell Cathodes

Published online by Cambridge University Press:  10 May 2012

Ayhan Sarikaya,
Vladimir Petrovsky and
Fatih Dogan
Ayhan Sarikaya
Affiliation:
Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO 65409, U.S.A.
Vladimir Petrovsky
Affiliation:
Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO 65409, U.S.A.
Fatih Dogan
Affiliation:
Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO 65409, U.S.A.
Get access

Abstract

Long term stability has been a crucial issue for the future applications of the solid oxide fuel cells (SOFCs). Current collectors for the cathodes have been among the most vulnerable components of the SOFCs due to their operation in oxidizing atmospheres at relatively high temperatures. Ag and Ag based LSM (lanthanum-strontium manganite) composites were studied to develop highly stable and low-cost current collectors compatible with other fuel cell components. In this study, no degradation was observed in the electrical conductivity and the porous microstructure of the Ag-LSM composite current collectors after 600 hours of operation at 800oC in air.

Keywords

Agporositymetallic conductor

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1385: Symposium C – In-Situ Studies of Solid-Oxide Fuel-Cell Materials , 2012, mrsf11-1385-c07-10
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Schafer, W., Koch, A., Herold-Schmidt, U., and Stolten, D., Solid State Ionics, 86-88, 1235 (1996).Google Scholar
2. Koch, S. and Hendriksen, P.V., Solid State Ionics, 168, 1 (2004).Google Scholar
3. Huang, K., Hou, P.Y., Goodenough, J.B., Solid State Ionics, 129, 237 (2000).Google Scholar
4. Piron-Abellan, J., Shemet, V., Tietz, F., Singheiser, L., and Quadakkers, W.J., in Proceedings of the Seventh International Symposium on Solid Oxide Fuel Cells, edited by Yokokawa, H., and Singhal, S.C., (PV 2001-16, The Electrochemical Proceedings Series, Pennington, NJ, USA, 2001) p. 811.Google Scholar
5. Yang, Z., Weil, K.S., Paxton, D.M. and Stevenson, J.W., J. Electrochem. Soc. 150, A1188 (2003).Google Scholar
6. Wilkinson, L.T., and Zhu, J.H., J. Electrochem. Soc. 156, B905–B912 (2009).Google Scholar
7. Yang, Z., Xia, G., Singh, P., and Stevenson, J.W., J. Power Sources 155, 246 (2006).Google Scholar
8. Simner, S.P., Anderson, M.D., Coleman, J.E., and Stevenson, J.W., J. Power Sources 161, 115 (2006).Google Scholar
9. Sheppard, T.B. and Kang, B.S.J., in Proceedings of Materials Science and Technology Conference (MS&T) 2007, (PV 2007-2, Detroit, MI, USA, 2007) p. 1209.Google Scholar
10. Singh, P., Yang, Z., Viswanathan, V., and Stevenson, J.W., J. Mater. Eng. Perform. 13, 287 (2004).Google Scholar
11. Camaratta, M. and Wachsman, E.D., Solid State Ionics, 178, 1242 (2007).Google Scholar
12. Anderson, H.U. and Tietz, F., in High Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications, edited by Singhal, S. C. and Kendall, K., (Elsevier Advanced Technology, Oxford, UK, 2003) p. 183.Google Scholar
13. Meulenberg, W.A., Teller, O., Flesch, U., Buchkremer, H.P., and Stöver, D., J. Mater Sci. 36, 3189 (2001).Google Scholar
14. Möbius, H. and Rohland, B., Z. Chem. 6, 158 (1996).Google Scholar
15. Badwal, S., Bannister, M. and Murray, M., J. Electroanal Chem. 168, 363 (1984).Google Scholar
16. Ramanarayanan, T.A. and Rapp, R.A., Metall. Mater. Trans. B, 3, 3239 (1972).Google Scholar
17. Sah, CT., Fundamentals of Solid-State Electronics, (World Scientific Publishing, Singapore, 1991) p. 436.Google Scholar
18. Jorgensen, M.J., Ph.D. Thesis, Keele University, Staffordshire, UK, (2001).Google Scholar