Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T22:34:25.746Z Has data issue: false hasContentIssue false

The Development of Alloys Based on Ni3Si

Published online by Cambridge University Press:  26 February 2011

W. C. Oliver*
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831
Get access

Abstract

Alloys with large volume fractions of the intermetallic phase Ni3Si have unique aqueous corrosion resistance that provides the driving force for an alloy design program to improve their generally poor room temperature mechanical properties. The target of the alloy design program at Oak Ridge National Laboratory was to produce wrought alloys with at least 10% room temperature ductility while retaining good aqueous corrosion resistance. In this paper several important findings will be discussed. These include macro and micro alloying (B, C, Be) to produce superplastic wrought alloys with high strength and high room-temperature ductility. Some of the alloys developed are strong enough to be competitive with medium temperature structural alloys such as Inconel® 718.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable