Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T03:12:54.460Z Has data issue: false hasContentIssue false

Development of lead-free materials for piezoelectric energy harvesting

Published online by Cambridge University Press:  22 June 2011

R. Rai
Affiliation:
DECV & CICECO, University of Aveiro, Aveiro, Portugal.
I. Coondoo
Affiliation:
DECV & CICECO, University of Aveiro, Aveiro, Portugal.
R. P. Lopes
Affiliation:
DECV & CICECO, University of Aveiro, Aveiro, Portugal.
I. Bdikin
Affiliation:
Centre for Mechanical Technology and Automation, University of Aveiro, Aveiro, Portugal.
R. Ayouchi
Affiliation:
Department of Physics and ICEMS, Instituto Superior Técnico, Lisbon, Portugal.
S. Bhattacharaya
Affiliation:
Department of Physics and ICEMS, Instituto Superior Técnico, Lisbon, Portugal.
R. Schwarz
Affiliation:
Department of Physics and ICEMS, Instituto Superior Técnico, Lisbon, Portugal.
A. L. Kholkin
Affiliation:
DECV & CICECO, University of Aveiro, Aveiro, Portugal.
Get access

Abstract

Mechanical energy harvesting from ambient vibrations is an attractive renewable source of energy for various applications. Prior research was solely based on lead-containing materials which are detrimental to the environment and health. Therefore, lead-free materials are becoming more attractive for harvesting applications. The present work is focused on the development of lead-free piezoelectric materials based on solid solution having composition (KNa)NbO3-xABO3, (where A = Li, and B = Nb; x = 0, 5, 5.5, 6, and 6.5 wt%). The solid solutions of the above ceramics were prepared by using solid-state reaction method. The X-ray diffraction spectra exhibited single phase formation and good crystallinity with LiNbO3 addition up to x = 6.5 wt%. Dielectric studies reveal that the composition with LiNbO3 = 6.5 wt% exhibits superior properties suitable for piezoelectric energy harvesting applications. The nanoscale piezoelectric data obtained with piezoresponse force microscopy provide a direct evidence of strong piezoelectricity with LN doping. The best piezoelectric properties are obtained for the composition K0.5Na0.5NbO3 – 6.5%LiNbO3.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable