Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T20:29:43.429Z Has data issue: false hasContentIssue false

Device Degrading Interactions between Silicide Films and Bulk Defects during Rapid Thermal Annealing

Published online by Cambridge University Press:  25 February 2011

D.R. Sparks
Affiliation:
Delco Electronics Corp. Kokomo, IN 46902
N.S. Alvi
Affiliation:
Delco Electronics Corp. Kokomo, IN 46902
Get access

Abstract

The interaction between titanium and nickel silicide films with dislocations generated at the wafer edge by thermal stress is examined in this work. The local dislocation density of the silicon wafers varied from zero to 4.8×106cm across a slice. Both titanium and nickel were deposited as thin films in the contact regions of the p-n junction diodes. Wafers were rapid thermal annealed, sequentially, for 30 s at temperatures between 300°C and 700°C. Reverse bias leakage current measurements of the as-deposited and annealed wafers were used to evaluate the impact of silicides and bulk defects on devices. A significant increase in leakage current due to the silicide/defect interaction was observed above 600 °C for both titanium and nickel. Leakage currents of devices fabricated in regions of high bulk defect density increased with the anneal temperature and dislocation density.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable