Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T17:06:40.837Z Has data issue: false hasContentIssue false

Diffusion of A Deposited GeSe Film in GaAs using Ion-Beam Mixing

Published online by Cambridge University Press:  25 February 2011

N. J. Kepler
Affiliation:
Department of Electrical Engineering and Computer Sciences and the Electronics Research Laboratory, University of California, Berkeley, CA 94720
N. W. Cheung
Affiliation:
Department of Electrical Engineering and Computer Sciences and the Electronics Research Laboratory, University of California, Berkeley, CA 94720
Get access

Abstract

Ion-beam mixing and rapid thermal annealing (RTA) techniques are used to form shallow and heavily-doped n+ layers in undoped GaAs. RTA reduces surface degradation and improves crystalline quality compared to lengthy thermal cycles, although furnace annealing producesidentical electrical characteristics. Ion-beam mixing has only a small effect on the diffusion of a deposited GeSe film, because the damage created by implantation is repaired during RTA before significant diffusion occurs. We define a threshold temperature representing the onset of significant electrical activation and/or diffusion, and propose a model relating the annealing, activation, and diffusion temperatures for the GeSe/GaAs system. RBS. SIMS, and electrical measurements show that extremely shallow layers with a sheet resistivity as low as 1480/El can be formed in GaAs by diffusion from a GeSe source. This technique has potential application to the formation of shallow ohmic contacts for GaAs integrated circuits.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable