Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T18:54:50.877Z Has data issue: false hasContentIssue false

Diffusion of Radionuclides in Brine-Saturated Backfill Barrier Materials*

Published online by Cambridge University Press:  21 February 2011

E. J. Nowak*
Affiliation:
Sandia National Laboratories, Albuquerque, New Mexico, 87185, USA
Get access

Abstract

The diffusion of cesium(I), strontium(II), pertechnetate and europium in brine-saturated backfill materials was measured. Plastic diffusion cells containing cylindrical diffusion columns were used for low density backfill materials. The diffusion of gamma-emitters was followed by a gamma scanning technique. Metal diffusion cells constructed entirely from Hastelloy C-276 were used for the diffusion of pertechnetate in highly compacted bentonite. Apparent distribution coefficients calculated from diffusion data are (a) 0.02 m3 /kg for cesium(I) in 40 wt.% mordenite and 60 wt.% bentonite; (b) 0.04 m3/kg for strontium(II) in 10 wt.% sodium titanate and 90 wt.% bentonite; (c) 0.5 m3/kg for pertechnetate in 70 wt.% charcoal and 30 wt.% bentonite; and (d) 3 m3/kg for europium in 100% bentonite. Backfill effectiveness estimates based on batch sorption measurements were supported by these results;however, the diffusion results for europium did not agree well with a model for diffusion retarded by linear sorption. First measurements of pertechnetate diffusion in highly compacted bentonite suggest that anion exclusion may play a role in reducing mass transport rates of anions in this material. Needs for diffusion measurements that take into account site-specific materials interactions are described.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable