Hostname: page-component-7b7567c8c-m6dxt Total loading time: 0 Render date: 2026-11-18T13:54:10.869Z Has data issue: false hasContentIssue false

Directional Solidification and Characterization of Hg1−xCdxTe Alloys*

Published online by Cambridge University Press:  15 February 2011

S. L. Lehoczky
Affiliation:
McDonnell Douglas Research Laboratories, McDonnell Douglas Corporation St. Louis, Missouri 63166 USA
F. R. Szofran
Affiliation:
McDonnell Douglas Research Laboratories, McDonnell Douglas Corporation St. Louis, Missouri 63166 USA
Get access

Abstract

A series of Hg1−xCdxTe alloy crystals was grown by high-temperature-gradient directional solidification at furnace translation rates ranging from 0.068 to 1.12 μm/s. For several ingots, the measured longitudinal compositional profiles were fitted to theoretical profiles to estimate the magnitude of D, the liquid HgTe-CdTe interdiffusion coefficient. The best-fit value of D was about 5.5 × 105 cm2/s. The majority of the ingots showed significant radial compositional variations along the growth axis. These variations are attributed, at least in part, to fluid flows ahead of the growth interface. The results are discussed in terms of the heat transfer characteristics of the alloy/ampule/ furnace system and the effects of these characteristics on the shape and stability of the growth interface in a 1-g environment.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable