Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T18:13:43.440Z Has data issue: false hasContentIssue false

Dry Etching of InGaP and AlInP in CH4/H2/Ar

Published online by Cambridge University Press:  10 February 2011

J. W. Lee
Affiliation:
University of Florida, Gainesville FL 32611
S. J. Pearton
Affiliation:
University of Florida, Gainesville FL 32611
C. J. Santana
Affiliation:
University of Florida, Gainesville FL 32611
E. S. Lambers
Affiliation:
University of Florida, Gainesville FL 32611
C. R. Abernathy
Affiliation:
University of Florida, Gainesville FL 32611
W. S. Hobson
Affiliation:
AT&T Bell Laboratories, Murray Hill NJ 07974
F. Ren
Affiliation:
AT&T Bell Laboratories, Murray Hill NJ 07974
Get access

Abstract

Electron Cyclotron Resonance (ECR) plasma etching with additional if-biasing produces etch rates ≥ 2,500Å/min for InGaP and AlInP in CH4/H2/Ar. These rates are an order of magnitude or much higher than for reactive ion etching conditions (RIE) carried out in the same reactor. N2 addition to CH4/H2/Ar can enhance the InGaP etch rates at low flow rates, while at higher concentrations it provides an etch-stop reaction. The InGaP and AtlnP etched under ECR conditions have somewhat rougher morphologies and different stoichiometries up to ˜200Å from the surface relative to the RIE samples.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable