Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-19T04:41:58.960Z Has data issue: false hasContentIssue false

Effect of Buffer Structure on the Performance of a-Si:H/a-Si:H Tandem Solar Cells

Published online by Cambridge University Press:  27 June 2011

C.H. Hsu
Affiliation:
Department of Photonics, National Chiao Tung University, Hsinchu, Taiwan
C.Y. Lee
Affiliation:
Department of Photonics, National Chiao Tung University, Hsinchu, Taiwan
P.H. Cheng
Affiliation:
Department of Photonics, National Chiao Tung University, Hsinchu, Taiwan
C.K. Chuang
Affiliation:
Department of Photonics, National Chiao Tung University, Hsinchu, Taiwan
C.C. Tsai
Affiliation:
Department of Photonics, National Chiao Tung University, Hsinchu, Taiwan
Get access

Abstract

The study focuses on the influence of the hydrogenated amorphous silicon carbide (a-SiC:H) buffer layer in hydrogenated amorphous silicon (a-Si:H) single-junction and tandem thin-film solar cells. By increasing the undoped a-SiC:H buffer layer thickness from 6nm to 12nm, the JSC in single-junction cell was significantly improved, and the efficiency was increased by 4.5%. The buffer layer also effectively improves the efficiency of the a-Si:H/a-Si:H tandem cells by 7% as a result of the increase in open-circuit voltage (VOC) and short-circuit current (JSC). Although the bottom cell absorbs less short-wavelength photons, the wider-bandgap doped and buffer layers were still necessary for improving the cell efficiency. Presumably, this is because these wider-bandgap layers allow more photons to reach the bottom cell. Also, they can reduce interface recombination.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable