Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T15:06:46.713Z Has data issue: false hasContentIssue false

Effect of Humidity on Dielectric Charging Process in Electrostatic Capacitive RF MEMS Switches Based on Kelvin Probe Force Microscopy Surface Potential Measurements

Published online by Cambridge University Press:  31 January 2011

Usama Zaghloul
Affiliation:
uzheiba@laas.fr, LAAS/CNRS, Université de Toulouse, MINC, Toulouse, France
George J. Papaioannou
Affiliation:
gpapaioan@phys.uoa.gr, University of Athens, Solid State Physics, Athens, Greece
Fabio Coccetti
Affiliation:
fcoccett@laas.fr, LAAS/CNRS, Novamems, Toulouse, France
Patrick Pons
Affiliation:
ppons@laas.fr, LAAS/CNRS, MINC, M2D, Toulouse, France
Robert Plana
Affiliation:
plana@laas.fr, LAAS/CNRS, Université de Toulouse, MINC, UPS, Toulouse, France
Get access

Abstract

In this article we investigate the effect of relative humidity on dielectric charging/discharging processes in electrostatically actuated MEMS devices. The assessment procedure is based on surface potential measurements using Kelvin Probe Force Microscopy (KPFM) and it targets in this specific work PECVD silicon nitride films in view of application in electrostatic capacitive RF MEMS switches. Charges have been injected through the AFM tip and the induced surface potential has been measured under different relative humidity levels. The impact of the charge injection duration and the bias level as well as bias polarity applied during the charge injection step, have been explored. Finally, the effect of the dielectric film thickness under different relative humidity levels has been assessed through depositing SiN films with different thicknesses.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable