Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T01:46:01.657Z Has data issue: false hasContentIssue false

Effect of Implantation Conditions on the Microstructure of High-Current, Oxygen Implanted Silicon-on-Insulator Material

Published online by Cambridge University Press:  25 February 2011

S. Visitsemgtrakul
Affiliation:
Department of Chemical, Bio and Materials Engineering, Arizona State University, Tempe, AZ 85287
B.F. Cordts
Affiliation:
Ibis Technology Corporation, 32A Cherry Hill Drive, Danvers, MA 01923.
S. Krause
Affiliation:
Department of Chemical, Bio and Materials Engineering, Arizona State University, Tempe, AZ 85287
Get access

Abstract

Conventional and high resolution electron microscopy were used to study structural development in silicon-on-insulator material produced by oxygen implantation at temperatures of 525 to 700°C, doses of 0.3 to 1.8 × 1018 cm-2, and current densities of 1 and 10 mA/cm2. Implantation temperature has the strongest effect on the microstructure and defect formation, both in as-implanted and annealed material. In the top silicon layer of as-implanted SIMOX, oxygen bubbles form near the surface when the wafer temperature is ≥ 550°C. A new type of defect, the multiply faulted defect (MFD), has been observed at the upper edge of the implantation region with a density of 108 cm-2 in the samples implanted at the temperature of ≥ 600°C. As dose increases from 0.3 to 1.8 × 1018 cm-2, the bubbles grow larger and the trails of bubbles lengthen while the character and density of MFDs remain the same. A continuous buried oxide layer forms at doses ≥ 1.5 × 1018 cm2. No significant difference in structure is observed when a current-density increases from 1 to 10 mA/cm2.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable