Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T15:38:24.993Z Has data issue: false hasContentIssue false

Effect of Platinoids on French LWR Reference Glass Properties

Published online by Cambridge University Press:  25 February 2011

F. Pacaud
Affiliation:
Rhône Valley Nuclear Research Center, DPR/SCD, BP 171, F 30205 Bagnols-sur-Cèze, France
C. Fillet
Affiliation:
Rhône Valley Nuclear Research Center, DPR/SCD, BP 171, F 30205 Bagnols-sur-Cèze, France
N. Jacquet-Francillon
Affiliation:
Rhône Valley Nuclear Research Center, DPR/SCD, BP 171, F 30205 Bagnols-sur-Cèze, France
Get access

Abstract

Nine samples of the “R7T7” glass composition selected to vitrify fission product solutions in France were prepared with added platinoid elements (ruthenium, rhoditun and palladium) in soluble form and as insoluble metal particles in solution, and their major properties were measured. Regardless of the initial form when added to the glass the platinoids always formed the same heterogeneous inclusions in the final glass: RuO2 precipitates which were often found as aggregates, and polymetallic (Pd, Rh & Te) inclusions.

The particles tended to settle in the molten glass. The viscosity increased by about 20% at 1100°C. The mechanical properties and short-term leach rates were not significantly affected. Crystallization increased by a factor of 2 or 3 in heat-treated glass specimens but did not exceed a few volume percent. However, as the short-term leach rate did not significantly increase, the glass properties were very satisfactory.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable