Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T18:23:56.905Z Has data issue: false hasContentIssue false

The Effect of Sheath Materials on the Superconductivity of MgB2

Published online by Cambridge University Press:  18 March 2011

W. Zhu
Affiliation:
IREQ, Hydro Québec, v1800 Lionel Boulet Varennes, Québec, J3X 1S1, Canada
D. R. Watson
Affiliation:
IREQ, Hydro Québec, v1800 Lionel Boulet Varennes, Québec, J3X 1S1, Canada
J. R. Cave
Affiliation:
IREQ, Hydro Québec, v1800 Lionel Boulet Varennes, Québec, J3X 1S1, Canada
Get access

Abstract

Inconel, tantalum and a silver-palladium alloy were used to fabricate MgB2tapes. The tapes, made by the Powder In Tube (PIT) method, were heat-treated at 800°C and 900°C in 1 atmosphere of flowing argon. The microstructure and phase composition of the tapes were examined by Scanning Electron Microscopy (SEM) and X-Ray Diffractometry (XRD). Critical temperatures (Tc) and magnetization-applied magnetic field (M-H) curves were measured by SQUID magnetometry. It is found that between 800–900°C inconel and tantalum sheaths have no effect on the Tc,inductive of the material. However, under certain processing conditions, the silver-palladium sheath can decrease the Tcor destroy the superconductivity completely. The inconel sheathed tape was found to have better superconducting properties than the tantalum and silver-palladium sheathed tapes. Consistency checks have been applied to verify the validity of the Bean Model in obtaining the critical current density (Jc) from magnetization data. The inconel sheathed tape is estimated to have a magnetization Jc(5K, ∼0.5 T) of 1.4 × 105A/cm2.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable