Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T23:41:58.260Z Has data issue: false hasContentIssue false

Effects of Halides and Sulphates in Synroc-C

Published online by Cambridge University Press:  10 February 2011

E. R. Vance
Affiliation:
Materials Division, Australian Nuclear Science and Technology Organisation, Menai, NSW 2234, Australia
J. S. Hartman
Affiliation:
Chemistry Dept., Brock University, St. Catharines, Ontario, L2S 3A I, Canada
Get access

Abstract

Halides can be retained in bellows hot-pressed Synroc-C. Loadings of 0.2 wt% of fluoride or 2 wt% of sulphate did not appear to exert deleterious effects on the aqueous durability of the Synroc, but 0.2 wt% of chloride or 0.5 wt% of fluoride increased the Cs leach rate by a factor of ˜10. Fluoride was present principally as CaF2 in both calcined and hot-pressed Synrocs containing (a) ˜2 wt% of F as the only waste or (b) ˜2 wt% of F plus 20 wt% of simulated PW-4b Purex reprocessing waste. The speciation of Cl- in Synroc is not clear, though there was some evidence of CsCl from nmr and a compound giving a similar X-ray pattern to that of TiCI3. Iodine can retained in the hot-pressed Synroc containing the full complement of fission products, probably as insoluble Ag, Cr or Pd group iodides.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable