Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T16:56:41.687Z Has data issue: false hasContentIssue false

The Effects of Passivation Thickness and Initial Aluminum Line Stress on Electromigration Behavior

Published online by Cambridge University Press:  10 February 2011

Samantha Lee
Affiliation:
Department of Materials Science & Engineering, Stanford University, Stanford, CA 94305
John C. Bravman
Affiliation:
Department of Materials Science & Engineering, Stanford University, Stanford, CA 94305
Paul A. Flinn
Affiliation:
Department of Materials Science & Engineering, Stanford University, Stanford, CA 94305
Tom N. Marieb
Affiliation:
Components Research, Intel Corp., Santa Clara, CA
Get access

Abstract

The electromigration behavior of pure Al lines passivated with oxides of different thicknesses and passivation deposition temperatures was studied. The initial hydrostatic stress states of the passivated Al lines were modeled with finite element modeling (FEM), and, when possible, measured with X-ray diffraction. Conventional wafer-level electromigration tests showed a clear passivation thickness effect, but no detectable effect of initial stress on electromigration lifetimes. Increasing the passivation thickness increased the electromigration lifetimes, which has been observed by other researchers. However, in a sample set where the Al lines were covered with a thin (0. 1µm) oxide layer, the lifetimes were much longer than expected. Differences in the damage morphology and the failure mechanism between the thin and thicker oxides accounted for this unexpected result.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable