Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-17T21:33:29.012Z Has data issue: false hasContentIssue false

Effects of Ternary Additions on the Microstructure of Directionally-Solidified MoSi2/Mo5Si3 Eutectic Composites

Published online by Cambridge University Press:  23 January 2013

Kosuke Fujiwara
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Yuta Sasai
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Kyosuke Kishida
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Haruyuki Inui
Affiliation:
Department of Materials Science and Engineering, Kyoto University, Sakyo-ku, Kyoto 606-8501, Japan
Get access

Abstract

Microstructural variations of directionally-solidified (DS) MoSi2/Mo5Si3 eutectic composites caused by ternary additions of V, Cr, Nb, Ta and W were investigated. Ternary addition of relatively large amount of V resulted in the apparent modification of the morphology as well as the macroscopic inclination angle of one type of the interfaces extending nearly along the growth direction in the DS ingots. Ternary addition of Cr was found to change the microstructures of the DS ingots from a cellular-type with coarse boundary regions to a plate-like cellular-type with increasing the amount of the ternary addition. No significant change of scriptlamellar morphology was observed for the DS ingots containing Nb, Ta and W irrespective of the amount of the ternary addition.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable