Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T12:32:37.131Z Has data issue: false hasContentIssue false

Electrical Contact Characteristics between Silicon Micropillars and Ag Nanoparticles with Controlled Mechanical Load

Published online by Cambridge University Press:  31 October 2012

VJ Logeeswaran
Affiliation:
Department of Electrical and Computer Engineering, University of California-Davis, CA 95616.
Mark Triplett
Affiliation:
Department of Electrical and Computer Engineering, University of California-Davis, CA 95616.Department of Physics, University of California-Davis, CA 95616.
Daniel Lam
Affiliation:
Department of Electrical and Computer Engineering, University of California-Davis, CA 95616.
Emre Yengel
Affiliation:
Department of Electrical and Computer Engineering, University of California-Davis, CA 95616.
Heim Grewal
Affiliation:
Department of Electrical and Computer Engineering, University of California-Davis, CA 95616.
Matthew Ombaba
Affiliation:
Department of Electrical and Computer Engineering, University of California-Davis, CA 95616.
M. Saif Islam
Affiliation:
Department of Electrical and Computer Engineering, University of California-Davis, CA 95616.
Get access

Abstract

We report an experimental investigation on employing Ag nanoparticles to provide electrical and mechanical contacts between transfer-printed semiconductor devices in the shape of micro/nano- wires and pillars. The Ag nanoparticles have diameters ranging between 200-800nm and are assembled on a 200nm Au film deposited on glass substrates. With a customized tool, an ensemble of silicon pillars were brought into contact with the silver (Ag) nanoparticles (AgNPs) by precisely controlling the displacement and applied force (pressure). Current-voltage measurements were done at force resolution of ~0.2N. The test method aims to illuminate the pillar-particle contact mechanism using the nanoparticles as conductive fillers for the next generation of high performance heteroepitaxial device transfer-printing applications.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable