Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T09:26:42.848Z Has data issue: false hasContentIssue false

Electrical Modelling and Characterisation of Alloyed Ohmic Contacts

Published online by Cambridge University Press:  21 February 2011

Geoffrey K. Reeves
Affiliation:
Royal Melbourne Institute of Technology, Melbourne, Australia.
Patrick W. Leech
Affiliation:
Telecom Australia Research Labs, Melbourne, Australia.
H. Barry Harrison
Affiliation:
Griffith University, Brisbane, Australia.
Get access

Abstract

This paper briefly reviews the standard Transmission Line Model (TLM) commonly used to measure the specific contact resistance of a planar ohmic contact. It is proposed that in the case of a typical Au-Ge-Ni alloyed ohmic contact, a more realistic model would need to take into account the presence of the alloyed layer at the metal-semiconductor interface. An alternative is described which is based on three contact layers and the two interfaces between them, thus forming a Tri-Layer Transmission Line Model (TLTLM). Expressions are given for the contact resistance Rc and the contact end resistance Re of this structure, together with a current division factor, f. Values for the parameters of this model are inferred from experimentally reported values of Rc and Re for two types of contact.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable