Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T10:52:31.423Z Has data issue: false hasContentIssue false

Electroluminescence imaging of Cu(In,Ga)Se2 thin film modules

Published online by Cambridge University Press:  31 January 2011

Uwe Rau
Affiliation:
u.rau@fz-juelich.de, Forschungszentrum Juelich, IEF5 Photovoltaik, Leo Brandt Str., Jülich, 52425, Germany
Thomas Kirchartz
Affiliation:
t.kirchartz@fz-juelich.de, Forschungszentrum Juelich, IEF5 Photovoltaik, Juelich, Germany
Anke Helbig
Affiliation:
anke.helbig@ipe.uni-stuttgart.de, Universität Stuttgart, Institut für Physikalische Elektronik, Stuttgart, Germany
Bart Elger Pieters
Affiliation:
b.pieters@fz-juelich.de, Forschungszentrum Juelich, IEF5 Photovoltaik, Juelich, Germany
Get access

Abstract

Electroluminescence images gained from Cu(In,Ga)Se2 mini-modules under different voltage bias conditions are investigated. The mini-modules of area 20 × 20 cm2 with 42 cells exhibit typically 10-20 localized shunts. The consequences of these shunts on the performance of the individual cells and of the entire module are analyzed quantitatively by evaluating the electroluminescence images. Our evaluation method uses the fact that the electroluminescence intensity at each position in each cell within the module depends on the actual voltage drop over the junction at this specific location. Thus, the analysis of the electroluminescence intensity allows us to reconstruct the current/voltage characteristics of all individual cells in the module. In addition, we provide first simulations using a distributed diode network model to quantitatively explain the experimental results.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable