Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T08:45:00.702Z Has data issue: false hasContentIssue false

Electroluminescence of Cu(In,Ga)Se2 solar cells and modules

Published online by Cambridge University Press:  21 August 2013

U. Rau
Affiliation:
IEK5-Photovoltaik, Forschungszentrum Jülich, 52425 Jülich, Germany
T. C. M. Müller
Affiliation:
IEK5-Photovoltaik, Forschungszentrum Jülich, 52425 Jülich, Germany
T. M. H. Tran
Affiliation:
IEK5-Photovoltaik, Forschungszentrum Jülich, 52425 Jülich, Germany
B. E. Pieters
Affiliation:
IEK5-Photovoltaik, Forschungszentrum Jülich, 52425 Jülich, Germany
A. Gerber
Affiliation:
IEK5-Photovoltaik, Forschungszentrum Jülich, 52425 Jülich, Germany
Get access

Abstract

Fundamental aspects of (electro-)luminescence of Cu(In,Ga)Se2 solar cells and modules are investigated by means of spectrally and spatially resolved measurements. The validity of the reciprocity relation between spectrally resolved electroluminescence emission and photovoltaic quantum efficiency is verified for the case of industrially produced ZnO/CdS/Cu(In,Ga)Se2 heterojunction solar cells. Further we find that photo- and electroluminescent emission in these devices obey a superposition principle only in a limited range of the applied electrical or illumination bias. This range depends on the light soaking history of the sample and extends up to an injected current density of approximately 15 mAcm-2 after 3 h of light soaking at a temperature of 400 K. In the state prior to light soaking this range is limited to 4 mAcm-2. At higher bias, a characteristic discrepancy between electroluminescence and electro-modulated photoluminescence appears. We attribute this anomaly to a potential barrier behavior close to the CdS/ Cu(In,Ga)Se2 interface. Metastable defect reactions induced by holes injected into the space charge region partly reduce this barrier. We further find that the luminescence efficiency is enhanced by a factor of 3 by light soaking at 400 K. Spatially resolved electroluminescence measurements conducted during application of voltage or current bias at ambient temperature in the dark are qualitatively compatible with the conclusions drawn from the spectrally resolved measurements.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable