Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T11:55:24.612Z Has data issue: false hasContentIssue false

Electromigration Behavior in Layered Ti/AlCu/Ti Films and its Dependence on Intermetallic Structure

Published online by Cambridge University Press:  15 February 2011

K. P. Rodbell
Affiliation:
IBM Research Division, Yorktown Heights, NY 10598
P. W. DeHaven
Affiliation:
IBM General Technology Division, Hopewell Junction, NY 12533
J. D. Mis
Affiliation:
IBM General Technology Division, Hopewell Junction, NY 12533
Get access

Abstract

A sputtered aluminum-low copper (Cu concentration < 2wt.%Cu), multilayered, submicron, device interconnect metallurgy consisting of two TiAl3 layers (∼,0.1μm thick) under and over an Al-Cu alloy conductor (0.95μm thick) with either an Al-Cu or TiN cap layer (0.05μm thick) has been developed. These films were patterned by reactive ion etching, and showed both a low susceptibility to corrosion and a low resistivity. Electromigration lifetime data on Al, Al-Cu, and both dc magnetron sputtered and electron gun evaporated multilayered fine lines, fabricated and tested in the same laboratory, are included for a direct comparison. Outstanding electromigration behavior was measured for sputtered, multilayered, submicron films with copper concentrations between 0.12 – 2wt.%Cu. In contrast, electromigration lifetimes of evaporated, multilayered films were found to degrade rapidly at < 2wt.%Cu. This anomalous electromigration behavior was attributed to structural differences in the Ti-Al intermetallics formed. It is proposed that defects present in the Ti-Al superlattice phase cause decreased electromigration performance compared to films in which TiAl3 exclusively forms. Multilevel structures, consisting of CVD W interlevel vias, were also investigated and found to have significantly degraded electromigration performance compared to planar samples. This was attributed to geometric and material flux divergences at the via/conductor interfaces.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable