Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T10:00:05.663Z Has data issue: false hasContentIssue false

Electromigration Reliability of Electroplated Gold Interconnects

Published online by Cambridge University Press:  09 June 2014

Steve H. Kilgore
Affiliation:
Freescale Semiconductor, Inc., Tempe, AZ 85284, USAMaterial Science and Engineering, Arizona State University, Tempe, AZ 85287, USA
Dieter K. Schroder
Affiliation:
Electrical Engineering, Arizona State University, Tempe, AZ 85287, USA
Get access

Abstract

The electromigration lifetimes of a very large quantity of passivated electroplated Au interconnects were measured utilizing high-resolution in-situ resistance monitoring equipment. Application of moderate accelerated stress conditions with current density limited to 2 MA/cm2 and oven temperatures in the range of 300°C to 375°C prevented large Joule-heated temperature gradients and electrical overstress failures. A Joule-heated Au film temperature increase of 10°C on average was determined from measured temperature coefficients of resistance (TCRs). A failure criterion of 50% resistance degradation was selected to avoid thermal runaway and catastrophic open circuit failures. All Au lifetime distributions followed log-normal statistics. An activation energy of 0.80 ± 0.05 eV was measured from constant-current electromigration tests at multiple temperatures. A current density exponent of 1.91 ± 0.03 was extracted from multiple current densities at a single constant temperature.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable