Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T13:01:16.393Z Has data issue: false hasContentIssue false

Enhanced Diffusion of High-Temperature Implanted Aluminum in Silicon Carbide

Published online by Cambridge University Press:  21 February 2011

A V. Suvorov
Affiliation:
Cree Research Inc., Durham, NC 27713, USA, asuvorov@cree.comPhysical Technical Institute RAS, St. Petersburg, 194021, Russia
I.O. Usov
Affiliation:
Physical Technical Institute RAS, St. Petersburg, 194021, Russia
V.V. Sokolov
Affiliation:
Physical Technical Institute RAS, St. Petersburg, 194021, Russia
A.A. Suvorova
Affiliation:
Physical Technical Institute RAS, St. Petersburg, 194021, Russia
Get access

Abstract

The diffusion of aluminum in silicon carbide during high-temperature A1+ ion implantation was studied using secondary ion mass spectrometry (SIMS). Transmission electron microscopy (TEM) has been used to determine the microstructure of the implanted sample. A 6H-SiC wafer was implanted at a temperature of 1800 °C with 40 keV Al ions to a dose of 2 x 1016 cm-2. It was established that an Al step-like profile starts at the interface between the crystal region and the damaged layer. The radiation enhanced diffusion coefficient of Al at the interface was determined to be Di = 2.8 x 10-12 cm2/s, about two orders of magnitude higher than the thermally activated diffusion coefficient. The Si vacancy-rich near-surface layer formed by this implantation condition is believed to play a significant role in enhanced Al diffusion.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable