Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T16:03:01.108Z Has data issue: false hasContentIssue false

Epitaxial Growth and Characterization of SiC on Different Orientations

Published online by Cambridge University Press:  01 February 2011

Larry B. Rowland
Affiliation:
rowland@research.ge.com, General Electric, GE Global Research, One Research Circle, Niskayuna, NY, 12309, United States
Canhua Li
Affiliation:
lic6@rpi.edu, Rensselaer Polytechnic Institute, Electrical, Computer, and Systems Engineering, 110 8th Street, Troy, NY, 12180-2786, United States
Greg T. Dunne
Affiliation:
dunne@research.ge.com, General Electric, GE Global Research, One Research Circle, Niskayuna, NY, 12309, United States
Jody A. Fronheiser
Affiliation:
fronheis@research.ge.com, General Electric, GE Global Research, One Research Circle, Niskayuna, NY, 12309, United States
Get access

Abstract

Background doping as well as intentional doping using nitrogen and trimethylaluminum have been investigated for 4H-SiC epitaxy on offcut Si face, C face, and a-axis substrates over a wide range of C:Si ratio. Smooth morphology can be obtained at a C:Si ratio of 2.0 on a-axis substrates but not on Si or C face material. Background doping levels of <1 × 1015 cm-3 were achieved on a-axis and Si face material. Nitrogen incorporated much more efficiently on C face and a-axis as compared to Si face. Aluminum incorporated most efficiently on Si face and least efficiently on C face. Both of the above dopant incorporation trends were most pronounced at high C:Si ratios and were small or virtually absent at low C:Si ratios.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable