Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T09:41:37.263Z Has data issue: false hasContentIssue false

Er-Doping of Gan and Related Alloys

Published online by Cambridge University Press:  10 February 2011

S. J. Pearton
Affiliation:
University of Florida, Gainesville FL 3211;
C. R. Abernathy
Affiliation:
University of Florida, Gainesville FL 3211;
J. D. MacKenzie
Affiliation:
University of Florida, Gainesville FL 3211;
R. N. Schwartz
Affiliation:
Hughes Research Laboratories, Malibu, CA 90265
R. G. Wilson
Affiliation:
Hughes Research Laboratories, Malibu, CA 90265
J. M. Zavada
Affiliation:
US Army Research Laboratory, RTP, NC 27709
R. J. Shul
Affiliation:
Sandia National Laboratories, Albuquerque NM 87185
Get access

Abstract

Er incorporation into GaN, AIN, MAIN and InGaN can be achieved using either direct ion implantation or by doping during Metal Organic Molecular Beam Epitaxy using metalorganic or elemental sources. When co-implanted with 0 and annealed between 600–800°C, strong luminescence at 1.54pm from optically excited Er3+ is detected in both binary nitrides and there was no measurable diffusion of Er in any of the materials. The low vapor pressures of the gaseous source compounds (erbium 2, 2, 2, 6-tetramethyl-3, 5-heptanedionate for Er + O; erbium bistrimethylsilylamide for Er) makes transport difficult unless high bubbler temperatures are used. Er concentrations up to ∼3×1021cm−3 in AIN have been obtained using a solid Er source. Microdisk laser structures with Er-doped active layers have been fabricated using a novel KOH selective wet etch and Cl2/CH4/H2/Ar dry etching.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable