Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T10:25:59.642Z Has data issue: false hasContentIssue false

Estimation Of Complex Permittivity Of Printed Circuit Board Material Using Waveguide Measurements

Published online by Cambridge University Press:  10 February 2011

C. J. Reddy
Affiliation:
Department of Electrical Engineering, Hampton University, Hampton VA 23668
M. D. Deshpande
Affiliation:
ViGYAN Inc., Hampton VA 23681
G. A. Hanidu
Affiliation:
Department of Electrical Engineering, Hampton University, Hampton VA 23668
Get access

Abstract

A simple waveguide measurement technique is presented to determine the complex permittivity of printed circuit board material. The printed circuit board with metal coating removed from both sides and cut into size which is the same as the cross section of the waveguide is loaded in a short X-band rectangular waveguide. Using a network analyzer, the reflection coefficient of the shorted waveguide(loaded with the sample) is measured. Using the Finite Element Method(FEM) the exact reflection coefficient of the shorted wavguide(loaded with the sample) is determined as a function of dielectric constant. Matching the measured value of the reflection coefficient with the reflection value calculated using FEM and utilizing Newton-Raphson Method, an estimate of the dielectric constant of a printed circuit board material is obtained. A comparison of estimated values of permittivity constant obtained using the present approach with the available data.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable