Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T15:49:47.596Z Has data issue: false hasContentIssue false

Evaluation of Prestressing with a Shape Memory Alloy

Published online by Cambridge University Press:  10 February 2011

Arup K. Maji*
Affiliation:
Air Force Research Laboratory (VSDV), Albuquerque, NM 87117-5776.
Get access

Abstract

The paper addresses the possibility of using shape-memory effect in Nitinol (Nickel-Titanium) alloy to remedy prestress losses in aging concrete beams. Straight annealed NiTi in the low temperature martensite phase can undergo large plastic deformations. This deformation and strain energy is recoverable when the material transforms to the higher temperature (about 55° C) austentite phase. This phenomena can be exploited to induce curvature, hence prestressing, by embedding NiTi wires and ropes in a structural member. Depending on the type of wire used its actuation effect can be reversed as necessary, creating the possibility of a smart prestressed concrete bridge of the future.

Materials aspect studied in this project include the bond between NiTi wires and the host composite material, through mechanical testing and microscopy. An evaluation of the phase transformation is conducted using Acoustic Emission (AE) technology. AE event rate, locations and characteristics were evaluated during the actuation process.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable