Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T07:08:27.596Z Has data issue: false hasContentIssue false

Evaluationof fracture toughness ofalpha-Nb5Si3 by micro-sized cantilever beam testing

Published online by Cambridge University Press:  18 February 2015

Shiori Suzuki
Affiliation:
Division of Materials Science and Engineering, Faculty of Engineering, Hokkaido University
Nobuaki Sekido
Affiliation:
National Institute for Materials Science
Takahito Ohmura
Affiliation:
National Institute for Materials Science
Seiji Miura
Affiliation:
Division of Materials Science and Engineering, Faculty of Engineering, Hokkaido University
Get access

Abstract

A micro-sized fracture testing method has been applied to investigate fracture toughness of alpha-Nb5Si3. Chevron-notched single crystal specimens with a size of 3 x 3 x 15 μm3 were prepared in a grain of polycrystalline alpha-Nb5Si3 by focused ion beam, FIB, technique. Fracture tests were conducted using a nanoindenter at room temperature and linear load-displacement curves and smooth fracture surfaces were obtained. This fracture behavior was presumed to be brittle fracture similar to bulk alpha-Nb5Si3. The average of fracture toughness K Q is 3.45 ± 0.29 MPa√m under a small-scale yielding condition.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable