Hostname: page-component-7b7567c8c-8tzhz Total loading time: 0 Render date: 2026-11-19T12:13:14.333Z Has data issue: false hasContentIssue false

Exploiting Phosphate Dependent DNA Immobilization on HfO2, ZrO2 and AlGaN for Integrated Biosensors

Published online by Cambridge University Press:  31 January 2011

Nicholas M Fahrenkopf
Affiliation:
nfahrenkopf@uamail.albany.edu, College of Nanoscale Science and Engineering, 255 Fuller Road, Albany, New York, 12203, United States
Vibhu Jindal
Affiliation:
Vibhu.Jindal@sematech.org, College of Nanoscale Science and Engineering, Albany, New York, United States
Neeraj Tripathi
Affiliation:
ntripathi@uamail.albany.edu, College of Nanoscale Science and Engineering, Albany, United States
Serge Oktyabrsky
Affiliation:
SOktyabrsky@uamail.albany.edu, College of Nanoscale Science and Engineering, Albany, United States
Fatemeh Shahedipour-Sandvik
Affiliation:
SOktyabrsky@uamail.albany.edu, College of Nanoscale Science and Engineering, Albany, United States
Natalya Tokranova
Affiliation:
SShahedipour@uamail.albany.edu, College of Nanoscale Science and Engineering, Albany, United States
Magnus Bergkvist
Affiliation:
NTokranova@uamail.albany.edu, College of Nanoscale Science and Engineering, Albany, United States
Nathaniel C Cady
Affiliation:
mBergkvist@uamail.albany.edu, College of Nanoscale Science and Engineering, Albany, United States
Get access

Abstract

A significant challenge for high throughput nucleic acid analysis and sequencing is to increase both throughput and sensitivity. Electrical detection methods are advantageous since they can be easily scaled to high density arrays, are highly sensitive, and do not require bulky optical equipment for readout. A focus of most nucleic acid based sensors is the detection of sequence-specific hybridization events between complementary strands of DNA or RNA. These hybridization events can be detected electrically, due to the intrinsic negative charge associated with the phosphate-rich nucleic acid backbone. Field effect transistors (FETs) and high electron mobility transistors (HEMTs) are ideal devices for detecting such hybridization events, due to their high sensitivity to changes in electrical field strength. A key concern for the construction of DNA-based FET and HEMT biosensors is the immobilization of probe oligonucleotides on the active region of the sensor. In previous work, our group has shown that single stranded DNA can be directly immobilized onto semiconductor materials without the need for complex surface chemistry or crosslinking strategies. In the present work, we have shown that the immobilization of single stranded DNA onto these materials is influenced by the terminal phosphate group of the DNA molecule, independent of backbone phosphates. This agrees with previous studies in which phosphates and phosphonates exhibited strong attachment to a variety of metal oxides. We have also shown that surface-immobilized DNA is available for hybridization and that hybridization is sequence specific. Phosphate-dependent immobilization was demonstrated for HfO2, AlGaN, and ZrO2 surfaces using optical detection of DNA-DNA hybridization, as well as x-ray photoelectron spectroscopy (XPS) analysis of DNA-modified surfaces.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable