Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-15T22:53:26.872Z Has data issue: false hasContentIssue false
  • English
  • Français

Exploration of an Electroactive Polymer as an Actuator for Microrobotics

Published online by Cambridge University Press:  01 February 2011

C. Bielmeier and
W. Walter
C. Bielmeier
Affiliation:
RIT Mechanical Engineering Robotics Laboratory, Rochester Institute of Technology, 76 Lomb Memorial Drive, Rochester, New York 14623
W. Walter
Affiliation:
RIT Mechanical Engineering Robotics Laboratory, Rochester Institute of Technology, 76 Lomb Memorial Drive, Rochester, New York 14623
Get access

Abstract

The development of lightweight low power consumption actuators is critical to the development of micro-robotics. Electroactive Polymers (EAP), i.e. Nafion N-117, meet these requirements. In the actuation of an EAP, the current does not remain constant over time. The development of a circuit model of current draw over time to best predict a current dynamic has been explored. While the material mimics a parallel plate capacitor, it has been found that capacitance plays no role in achieving steady state current levels. This development is critical to understanding and developing the material as an actuator.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 785: Symposium D – Materials and Devices for Smart Systems , 2003, D8.5
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

6. REFERENCES

[1] Mallavarapu, K. “Feedback Control of Ionic Polymers Actuators” Masters of Science Thesis in Mechanical Engineering, Virginia Polytechnic Institute and State University, July 2001.Google Scholar
[2] Shahinpoor, M and Kim, K.J. “Ionic Polymer-Metal Composites: I. Fundamentals”, Smart Materials and Structures, vol. 10, pages 819–833, 2001.10.1088/0964-1726/10/4/327Google Scholar
[3] Shahinpoor, M. “Electro-Mechanics of Iono-Elastic Beams As Electrically-Controllable Artificial Muscles” Artificial Muscle Research Institute.Google Scholar
[4] Bennett, M.: email accompanying Virginia Polytechnic Institute's EAP material sample, 2003.Google Scholar
[5] Bielmeier, C. “Exploration of an Electroactive Polymer Actuator for Application in a Grasshopper Inspired Pneumatic Robotic Hopper” Master of Science Thesis in Mechanical Engineering, Rochester Institute of Technology, March 2003.10.1557/PROC-785-D8.5Google Scholar
[6] HyperPhysics website: http://hyperphysics.phy-str.gsu.edu/hbase/electric/pplate.html#c2 Google Scholar
[7] Shahinpoor, M. and Lumia, R. “Microgripper Design using Electro-Active Polymers,” The SPIE Conference on Electroactive Polymer Actuators and Devices, Newport Beach California, vol. 3669-30 pp. 322–329, March 1999.Google Scholar