Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T13:55:10.438Z Has data issue: false hasContentIssue false

The Fabrication of Complex Membrane Structures in N-GaAs for Micromechanical Applications

Published online by Cambridge University Press:  21 February 2011

J. Miao
Affiliation:
Institut fur Hochfrequenztechnik, Technische Hochschule Darmstadt, Merckstrasse 25, Darmstadt 64238, GermanyDepartment of Electronic and Electrical Engineering, University of Surrey, Guildford, Surrey, GU2 5XH, UK
B.L. Weiss
Affiliation:
Institut fur Hochfrequenztechnik, Technische Hochschule Darmstadt, Merckstrasse 25, Darmstadt 64238, Germany
H.L. Hartnagel
Affiliation:
Institut fur Hochfrequenztechnik, Technische Hochschule Darmstadt, Merckstrasse 25, Darmstadt 64238, Germany
R.J. Wilson
Affiliation:
Department of Electronic and Electrical Engineering, University of Surrey, Guildford, Surrey GU2 5XH, UK
D. Ruck
Affiliation:
Gesellschaft fur Schwerionenforschung (GSI), Planckstrasse 1, D-64220, Darmstadt, Germany
Get access

Abstract

A novel process for the fabrication of complex membrane structures in n-GaAs has been developed which utilises high energy nitrogen implantation and annealing to produce a semi-insulating etch stop layer and pulsed anodic etching for the selective removal of material. The process is versatile and can be used to produce complex, single crystal, stress-free, self-supporting membrane structures which are suitable for use as transducers operating up to ∼300°C. The semi-insulating properties of the membrane demonstrates its potential use as a substrate for electronic circuits.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable