Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T15:59:06.149Z Has data issue: false hasContentIssue false

Fabrication of Composite Materials from Fibrous Precursors Using Paper Making Procedures

Published online by Cambridge University Press:  16 February 2011

J. N. Zabasajja
Affiliation:
Department of Chemical Engineering, Auburn University, AL 36849
Soonho Ahn
Affiliation:
Department of Chemical Engineering, Auburn University, AL 36849
Tony Wu
Affiliation:
Department of Chemical Engineering, Auburn University, AL 36849
A. Krishnagopalan
Affiliation:
Department of Chemical Engineering, Auburn University, AL 36849
B. J. Tatarchuk
Affiliation:
Department of Chemical Engineering, Auburn University, AL 36849
Get access

Abstract

Novel composite materials have been fabricated from fibrous precursors using paper making procedures. Small metal fibers (2 μm in diameter) and carbon fiber bundles (20 μm in diameter) were combined with cellulose (as the binding agent) into an interwoven paper preform. The composite paper preform was then sintered at high temperatures in a controlled atmosphere, subsequently removing the cellulose and forming a sinter-bonded composite structure. The sinter bonding of the metal locked the metal fibers and provided high mechanical flexibility and structural integrity to the resulting composite structure. The composite structures were characterized using scanning electron microscopy, electrochemical and kinetic measurements. The optimization of these structures for high energy density applications was demonstrated through these measurements.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable