Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T05:02:09.373Z Has data issue: false hasContentIssue false

Fabrication of Discrete Track Media with Patterned Servo-areas and Tracks on Disk Substrate

Published online by Cambridge University Press:  26 February 2011

Yuko Tsuchiya
Affiliation:
yuko.tsuchiya.yq@hitachi.com, Hitachi, Ltd., Central Research Laboratory, Magnetic Drive Technology Research Department, 1-280, Higashi-Koigakubo, Kokubunji, 1858601, Japan, +81-42-323-1111, +81-42-327-7709
Kenichi Ito
Affiliation:
kenichi.ito.xm@hitachi.com, Hitachi, Ltd., Central Research Laboratory, Magnetic Drive Technology Research Department, 1-280, Higashi-Koigakubo, Kokubunji, 1858601, Japan
Chiseki Haginoya
Affiliation:
chiseki.haginoya.yb@hitachi.com, Hitachi, Ltd., Central Research Laboratory, Magnetic Drive Technology Research Department, 1-280, Higashi-Koigakubo, Kokubunji, 1858601, Japan
Yoshiyuki Hirayama
Affiliation:
yoshiyuki.hirayama.ec@hitachi.com, Hitachi, Ltd., Central Research Laboratory, Magnetic Drive Technology Research Department, 1-280, Higashi-Koigakubo, Kokubunji, 1858601, Japan
Get access

Abstract

Discrete track media (DTM) with patterned servo-areas and recording tracks were fabricated on disk substrates in a two-step RIE process, creating a fine pattern transfer from an imprinted resist mask to a substrate surface without variations in groove depth. The fabricated DTM with perpendicular magnetic recording layers flew stably during read out signal detection.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable