Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T14:02:58.693Z Has data issue: false hasContentIssue false

Fabrication of NiAl Intermetallic from Dense Elemental Powder Blends VIA Solid State Reactions

Published online by Cambridge University Press:  15 February 2011

L. Farber
Affiliation:
Department of Materials Engineering, Technion, Haifa 32000, Israel
I. Gotman
Affiliation:
Department of Materials Engineering, Technion, Haifa 32000, Israel
E. Y. Gutmanas
Affiliation:
Department of Materials Engineering, Technion, Haifa 32000, Israel
Get access

Abstract

Dense NiAl intermetallic was synthesized from very fine elemental powders via solid state reactions. Homogeneous blends of micron size Ni and Al powders were consolidated to full density and heat treated in a 425–800°C temperature range. During heat treatment, formation of various intermediate intermetallics phases: NiAl3, Ni2A13, Ni3Al and NiAl was observed. The sequence and kinetics of these phase formations at different temperatures were studied employing X-ray diffraction analysis (XRD). A model for a description of synthesis reaction kinetics in Ni-Al blends was developed. Based on the obtained results, the synthesis of NiAl was performed in two stages : reactions in 425–550°C range with consumption of Al, followed by a reaction at up to 800°C. It allowed uncontrolled SHS (self propagating high temperature synthesis, resulting in the occurrence of liquid phases and in formation of reaction products in a very fast /explosive manner) to be avoid. The synthesis temperatures are considerably lower than those used currently in processing of NiAl.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable