Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T20:33:06.938Z Has data issue: false hasContentIssue false

Fabrication of Transparent, Conductive Phase-segregated ITO/PC Composites

Published online by Cambridge University Press:  01 February 2011

Celeste Mason
Affiliation:
celeste.m@gatech.edu, Georgia Institute of Technology, Materials Science and Engineering, Atlanta, Georgia, United States
Rosario Gerhardt
Affiliation:
rosario.gerhardt@mse.gatech.edu, Georgia Institute of Technology, Materials Science and Engineering, Atlanta, Georgia, United States
Get access

Abstract

Fabrication of transparent, conductive phase-segregated ITO/PC composites was accomplished by compression molding of dry mixed constituents. Mixtures of 50nm indium tin oxide particles in a polycarbonate matrix of compositions ranging from phr = 1.0 to 0.001 were measured by optical and electrical methods. Measured transmittance ranged from 5% to 68% at 400nm, 15% to 80% at 700nm, and averaged 10% to 75% across the visible spectrum. Resistance was measured by impedance spectroscopy. Resistivities of the different composites spanned 10 orders of magnitude. Electrical percolation was found to occur near phr = 0.15.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable