Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-17T23:22:58.887Z Has data issue: false hasContentIssue false

Fatigue of Thin Silver Films Investigated by Dynamic Microbeam Deflection

Published online by Cambridge University Press:  10 February 2011

R. Schwaiger
Affiliation:
Max-Planck-lnstitut ftir Metallforschung, and Institut fiir Metallkunde, Universitdt Stuttgart, D-70174 Stuttgart, GERMANY
O. Kraft
Affiliation:
Max-Planck-lnstitut ftir Metallforschung, and Institut fiir Metallkunde, Universitdt Stuttgart, D-70174 Stuttgart, GERMANY
Get access

Abstract

The fatigue behavior of bilayer microbeams consisting of thin Ag films on an SiO2 substrate was investigated. The beams were cyclically deflected using a commercial nanoindentation instrument, which is capable of precise positioning of indentations. The dynamic beam stiffness is monitored continuously throughout the whole experiment. Silver was chosen as a model material for fcc metals. For large strains and/or strain amplitudes the beam stiffness decreased significantly during the fatigue tests, which is related to damage formation, as cracks and extrusions were found after the experiment. In fatigue tests at lower strains and the same number of cycles no significant stiffness change was observed. In this case only extrusions but no cracks occurred.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable