Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T00:44:29.733Z Has data issue: false hasContentIssue false

Fixation of high Level Solid Waste (HLSW) in a TiO2 Base Ceramic Matrix Provided with an Integrated Overpack

Published online by Cambridge University Press:  21 February 2011

Christof Bauer
Affiliation:
Institut für Material- und Festkörperforschung, Kernforschungszentrum Karlsruhe and University Karlsruhe (TH), P.O.B. 3640, D-7500 karlsruhe 1
Gerhard Ondracek
Affiliation:
Institut für Material- und Festkörperforschung, Kernforschungszentrum Karlsruhe and University Karlsruhe (TH), P.O.B. 3640, D-7500 karlsruhe 1
Get access

Extract

In the past years a lot of research work has been done in several countries to find a waste form capable of accommodating the wide variety of elements present in commercial high level waste (HLW) and which at the same time, has a higher leaching resistance than the currently favoured high level waste glass. The main problems arising from a product made up of different phases, each of them taking up a certain fraction of the HLW-elements into solid solution, are

1) the necessity of very intimate mixing of the HLW-elements and the inert additives because otherwise undesired highly leachable phases might be formed;

2) the detrimental effect transmutation of the radioactive elements will most probably have on the crystal structure in which they are present. Fracturing and loss of the low solubility of the products are likely to occur.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable