Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T08:49:35.131Z Has data issue: false hasContentIssue false

Flame Annealing of Ion Implanted Silicon

Published online by Cambridge University Press:  15 February 2011

J. Narayan
Affiliation:
Solid State Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830
R. T. Young
Affiliation:
Solid State Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830
Get access

Abstract

We have investigated flame annealing of ion implantation damage (consisting of amorphous layers and dislocation loops) in (100) and (111) silicon substrates. The temperature of a hydrogen flame was varied from 1050 to 1200°C and the interaction time from 5 to 10 seconds. Detailed TEM results showed that a “defect-free” annealing of amorphous layers by solid-phase-epitaxial growth could be achieved up to a certain concentration. However, dislocation loops in the region below the amorphous layer exhibited coarsening,i.e., the average loop size increased while the number density of loops decreased. Above a critical loop density, which was found to be a function of ion implantation variables and substrate temperature, formations of 90° dislocations (a cross-grid of dislocation in (100) and a triangular grid in (111) specimens) were observed. Electrical (Van der Pauw) measurements indicated nearly a complete electrical activation of dopants with mobility comparable to pulsed laser annealed specimens. The characteristics of p-n junction diodes showed a good diode perfection factor of 1.20–1.25 and low reverse bias currents.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1983

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable