Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T21:00:40.487Z Has data issue: false hasContentIssue false

Formation of Continuous Cubic Mesoporous Films by Spin Casting

Published online by Cambridge University Press:  10 February 2011

I. Honma
Affiliation:
Energy division, Electrotechnical laboratory, AIST, Umezono 1-1-4, Tsukuba, Ibaraki, 305, Japan, e9513@etl.go.jp, tel:+81-298-54-5797, fax:+81-298-54-5805
H.S. Zhou
Affiliation:
Energy division, Electrotechnical laboratory, AIST, Umezono 1-1-4, Tsukuba, Ibaraki, 305, Japan, e9513@etl.go.jp, tel:+81-298-54-5797, fax:+81-298-54-5805
D. Kundu
Affiliation:
Sol-Gel Division, Central Glass and Ceramic Research Institute, Calcutta, India
Get access

Abstract

The simple spin casting technique has been successfully used for producing mesoporous thin films on glass substrate. The films are found to be homogeneous and continuous in a large size scale, however, the mesostructural phase of the film has been controlled systematically among amorphous (A), one-dimensional hexagonal (1-dH), cubic (C) and Lamellae (L) by increasing surfactant to TEOS concentration ratio in the casting solution. The 1-dH as well as cubic structure is thermally stable after the calcination so that a mesoporous thin film is obtained by surfactant removal. The solution additives of 1-propanol and 2-butanol might play a roll in the direct formation of the primitive cubic phase in the film form which has never been obtained.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable