Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T14:03:54.299Z Has data issue: false hasContentIssue false

Formation of Ga2O3 barrier layer in Cu(InGa)Se2 superstrate devices with ZnO buffer layer

Published online by Cambridge University Press:  28 August 2013

Jes K. Larsen
Affiliation:
Institute of Energy Conversion, University of Delaware, Newark, DE, 19716, USA
Peipei Xin
Affiliation:
Institute of Energy Conversion, University of Delaware, Newark, DE, 19716, USA
William N. Shafarman
Affiliation:
Institute of Energy Conversion, University of Delaware, Newark, DE, 19716, USA
Get access

Abstract

The junction formation when Cu(InGa)Se2 is deposited onto ZnO in a superstrate configuration (glass/window/buffer/Cu(InGa)Se2/contact) is investigated by x-ray photoelectron spectroscopy and analysis of device behavior. When Cu(InGa)Se2 is deposited on ZnO, a Ga2O3 layer is formed at the interface. Approaches to avoid the formation of this unfavorable interlayer are investigated. This includes modifications of the process to reduce the thermal load during deposition and improvement of the thermal stability of the ZnO buffer layer. It was demonstrated that both lowering of the substrate deposition temperature and deposition of the ZnO buffer layer at elevated temperature limits the Ga2O3 formation. The presence of Ga2O3 at the junction does affect the device behavior, resulting in a kink in JV curves measured under illumination. This behavior is absent in devices with limited Ga2O3 formation.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable