Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-19T06:34:48.256Z Has data issue: false hasContentIssue false

Fracture of Thin Tantalum Nitride Films on Ain Substrates

Published online by Cambridge University Press:  15 February 2011

N. R. Moody
Affiliation:
Sandia National Laboraties, Livermore, CA 94551–0969
D. Medlin
Affiliation:
Sandia National Laboraties, Livermore, CA 94551–0969
D. P. Norwood
Affiliation:
Sandia National Laboraties, Albuquerque, NM, 87185
Get access

Abstract

Nanoindentation, continuous nanoscratch testing, and transmission electron microscopy were used in this study to determine the structure-property relationships of thin tantalum nitride resistor films on aluminum nitride substrates. The films were sputter-deposited to a nominal thickness of 200 nm during one production run and then tested at room temperature. Most films were uniform in structure and thickness, consisting of fine equiaxed crystallites along the film-substrate interfaces and long columnar grains further away from the interface. However, one film varied greatly in thickness across the substrate. It had large crystallites along the film-substrate interface and clusters of columnar grains. Most importantly, it contained a far greater amount of porosity than the other films. The high porosity content led to significantly lower elastic moduli and hardness values than the low porosity films and a much greater susceptibility to fracture.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable