Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T05:04:07.019Z Has data issue: false hasContentIssue false

Fracture Toughness and Microstructure of Nial-Based Composite with TiC Reinforcement

Published online by Cambridge University Press:  22 February 2011

Z. P. Xing
Affiliation:
Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015, P.R.ChinaSchool of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, P.R.China.
J. T. Guo
Affiliation:
Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015, P.R.China
J. Y. Dai
Affiliation:
Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015, P.R.China
L. G. Yu
Affiliation:
Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015, P.R.China
Z. Q. Hu
Affiliation:
Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015, P.R.China
G. Y. An
Affiliation:
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, P.R.China.
Q. Y. Chen
Affiliation:
Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015, P.R.China
Get access

Abstract

Fracture toughness of NiAl–based composite reinforced by TiC particulate was measured using single–edge notched three–point bend specimens. The composite was fabricated by HPES (hot pressing aided exothermic synthesis) technique. It is shown that the ambient toughness of stoichiometric NiAl was increased from 5.9 MPa m1/2 to 8.9 MPa m1/2 by incorporating 20 vol.% TiC particulates. From fracture surface analysis along with the high–resolution electron microscopy (HREM) observation, toughening mechanisms of the NiAl–TiC composite were also discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable