Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T18:30:17.725Z Has data issue: false hasContentIssue false

GaN PN-Structures Grown by Hydride Vapor Phase Epitaxy

Published online by Cambridge University Press:  10 February 2011

A. E. Nikolaev
Affiliation:
Crystal Growth Research Center, St. Petersburg, 194021, RussiaPhysTech-WBG Research Group, A.F. loffe Institute, St. Petersburg, 194021, Russia
YU. V. Melnik
Affiliation:
Crystal Growth Research Center, St. Petersburg, 194021, RussiaPhysTech-WBG Research Group, A.F. loffe Institute, St. Petersburg, 194021, Russia
N. I. Kuznetsov
Affiliation:
PhysTech-WBG Research Group, A.F. loffe Institute, St. Petersburg, 194021, Russia
A. M. Strelchuk
Affiliation:
PhysTech-WBG Research Group, A.F. loffe Institute, St. Petersburg, 194021, Russia
A. P. Kovarsky
Affiliation:
Mechanobr-Analyt, St. Petersburg, Russia
K. V. Vassilevski
Affiliation:
PhysTech-WBG Research Group, A.F. loffe Institute, St. Petersburg, 194021, RussiaTDI, Inc., Bethesda, MD 20814, USA
V. A. Dmitriev
Affiliation:
MSRCE, Howard University, Washington DC, 20059 USATDI, Inc., Bethesda, MD 20814, USA
Get access

Abstract

For the first time, GaN pn-junctions were fabricated by hydride vapor phase epitaxy. GaN pn-structures were grown directly on 6H-SiC substrates without any buffer layer. Undoped GaN layers were n-type with Nd-Na concentration ranged from 1×1017 to 5×1018 cm−3. Magnesium was used as an acceptor to grow p-type GaN layers. Mg atomic concentration determined by secondary ion mass spectroscopy ranged from 5×1019 to 5×1020 cm−3. As-grown GaN layers doped with Mg were p-type, and p-type conductivity was improved by post-growth anneal. Mesa diodes with a vertical current flow geometry were formed by reactive ion etching. The position of the GaN pn-junction was determined by the electron beam induced current method. The electrical characteristics of the pn diodes were studied. Electroluminescence from the pn diodes was measured.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable