Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-15T09:12:10.731Z Has data issue: false hasContentIssue false
  • English
  • Français

Gradient and Discrete Region Composites Produced by Solid Free Form Fabrication Techniques

Published online by Cambridge University Press:  10 February 2011

R. S. Crockett and
V. R. Gervasi
R. S. Crockett
Affiliation:
Rapid Prototyping Center, Milwaukee School of Engineering, Milwaukee, WI 53202
V. R. Gervasi
Affiliation:
Rapid Prototyping Center, Milwaukee School of Engineering, Milwaukee, WI 53202
Get access

Abstract

Stereolithography patterns have been used to create composites with gradient properties. Patterns are produced with an open cellular or columnar structure inside a surface shell. This serves as a host for filler materials, generally epoxies or polyurethane matrices loaded with various fibers or microspheres. Regions within a single object may be separated by thin barriers, allowing filling with different matrix materials to create regions of differing local properties.The internal structure can also be continually gradated in dimension to produce composites with properties ranging from that of the filler material to that of the SFF material, currently epoxy or ABS plastic. This is a general set of processes that can be applied to a variety of existing Solid Freeform Fabrication systems.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 542: Symposium V – Solid Freeform and Additive Fabrication , 1998, 25
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Gervasi, V.R., Brandt, D., Shaffer, S., and Lim, K., “TetraCast SLA Build Style”, International Conference on RP, 309–317, (1997)Google Scholar
2. Gervasi, V.R., “Net Shape Composites using SLA TetraCast Patterns”, in Proceedings of the 1997 Solid Freeform Fabrication Symposium, Austin, TX, 149–157, (1997).Google Scholar
3. Gervasi, V.R. and Crockett, R.S., “Composites with Gradient Properties From Solid Freeform Fabrication,” in Proceedings of the 1998 Solid Freeform Fabrication Symposium, Austin, TX, (1998).Google Scholar
4. Yamada, H, “Strength of Biological Materials” (W & W Co., MD, 1970), p 297.Google Scholar
5. Burstein, , Albert, H., Reilly, , Donald, T., Martens, , Marc. “Aging of Bone Tissue: Mechanical Properties.” The Journal of Bone and Joint Surgery 58a (1). 82–86 (1976).Google Scholar
6. Evans, FG, “Mechanical Properties of Bone” (CC Thomas, IL, 1973), p 322.Google Scholar