Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T04:55:50.070Z Has data issue: false hasContentIssue false

Grain Boundary Diffusion in NiFe/Ag Bilayer Thin Films

Published online by Cambridge University Press:  15 February 2011

M. Gall
Affiliation:
Materials Laboratory for Interconnect and Packaging, University of Texas at Austin, BRC/MER Mail Code 78650, Austin, TX 78712-1100
J.G. Pellerin
Affiliation:
Materials Laboratory for Interconnect and Packaging, University of Texas at Austin, BRC/MER Mail Code 78650, Austin, TX 78712-1100
P.S. Ho
Affiliation:
Materials Laboratory for Interconnect and Packaging, University of Texas at Austin, BRC/MER Mail Code 78650, Austin, TX 78712-1100
K.R. Coffey
Affiliation:
IBM Storage Systems Division, 5600 Cottle Rd, 808/282, San Jose, CA 95193
J.K. Howard
Affiliation:
IBM Storage Systems Division, 5600 Cottle Rd, 808/282, San Jose, CA 95193
Get access

Abstract

X-ray photoelectron spectroscopy (XPS) has been used to investigate grain boundary diffusion of Ag through 250 Å thick Ni80Fe20 (permalloy) films in the temperature range of 375 to 475°C. Grain boundary diffusivities were determined by modeling the accumulation of Ag on Ni80Fe20 surfaces as a function of time at fixed annealing temperature. The grain boundary diffusivity of Ag through Ni80Fe20 is characterized by a diffusion coefficient prefactor, D0,gb, of 0.9 cm2/sec and an activation energy, Ea,gb, of 2.2 eV. The Ni80Fe20 film microstructure has been investigated before and after annealing by atomic force microscopy and x-ray diffraction. The microstructure of Ni80Fe20 deposited on Ag underlayers remained relatively unchanged upon annealing.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable