Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T09:49:20.773Z Has data issue: false hasContentIssue false

Grain Growth Behavior of a Rapidly Solidified Fe-10Cr-8A1 Alloy

Published online by Cambridge University Press:  26 February 2011

M. J. Maloney
Affiliation:
H.H. Uhlig Corrosion Laboratory, Massachusetts Institute of Technology, Cambridge, MA 02139
A. J. Garratt-Reed
Affiliation:
H.H. Uhlig Corrosion Laboratory, Massachusetts Institute of Technology, Cambridge, MA 02139
G. J. Yurek
Affiliation:
H.H. Uhlig Corrosion Laboratory, Massachusetts Institute of Technology, Cambridge, MA 02139
Get access

Abstract

A rapidly solidified Fe-10Cr-8Al alloy that contained a dispersion of very fine MnS and Al203 particles was produced by a gas atomization/twin-roll quenching technique. The RS particulates were consolidated by hot isostatic pressing, and the consolidated alloy was hot forged, and then hot and cold rolled. Grain growth took place during primary recrystallization of the alloy; however, once primary recrystallization was complete, the dispersion of second phase particles was effective in pinning alloy grain boundaries.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable