Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T03:51:56.838Z Has data issue: false hasContentIssue false

Grain Size Distribution Effect on Mechanical Behavior of Nanocrystalline Materials

Published online by Cambridge University Press:  15 March 2011

A.V. Sergueeva
Affiliation:
Department of Chemical Engineering and Materials Science, University of California, Davis, CA 95616, USA
N.A. Mara
Affiliation:
Department of Chemical Engineering and Materials Science, University of California, Davis, CA 95616, USA
A.K. Mukherjee
Affiliation:
Department of Chemical Engineering and Materials Science, University of California, Davis, CA 95616, USA
Get access

Abstract

Grain size distribution effect on the mechanical behavior of NiTi and Vitroperm alloys were investigated. Yielding at significantly lower stresses than found in equiaxed counterparts, along with well defined strain hardening was observed in these nanocrystalline materials with large grains embedded in the matrix during tensile deformation at temperatures of 0.4Tm. At higher temperature the effect of grain size distribution on yield stress was not revealed while plasticity was increased in 50% in NiTi alloy with bimodal grain size structure.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable