Hostname: page-component-7b7567c8c-2jgqx Total loading time: 0 Render date: 2026-11-19T14:05:26.377Z Has data issue: false hasContentIssue false

Grain Size Relationships between the Magnetic Layer and the Underlayers in CoCrPtTa Recording Media

Published online by Cambridge University Press:  14 March 2011

Kai Ma
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, California 94305-2205
Robert Sinclair
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, California 94305-2205
Gerardo Bertero
Affiliation:
Komag Inc., 1704 Automation Parkway, San Jose, California 95131
Wei Cao
Affiliation:
Komag Inc., 1704 Automation Parkway, San Jose, California 95131
Get access

Abstract

This article presents a transmission electron microscopic (TEM) investigation of the relationship between the magnetic and underlayer grain sizes in CoCrPtTa/CrMo longitudinal magnetic recording media. A great deal of effort has been expended on decreasing the underlayer grain size in order to decrease that of the magnetic layer. However, our results show that the two grain sizes may not always correlate. When the underlayer (CrMo) grains are sufficiently small, the magnetic layer (CoCrPtTa) grain size does not necessarily decrease with further underlayer grain size reduction. By carefully controlling the processing conditions, CrMo grain sizes were made to vary from 16nm down to 10nm. However, the corresponding CoCrPtTa grain sizes remained nearly the same. As the underlayer grain size decreased, the ratio of magnetic to underlayer grain size increased from 0.9 to 1.4.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable