Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T18:30:58.268Z Has data issue: false hasContentIssue false

Growth of MonX by Reactive Laser ablation

Published online by Cambridge University Press:  21 February 2011

Randolph E. Treece
Affiliation:
Code 6674, Naval Research Laboratory, Washington, DC 20375.
James S. Horwitz
Affiliation:
Code 6674, Naval Research Laboratory, Washington, DC 20375.
Edward Donovan
Affiliation:
Code 6674, Naval Research Laboratory, Washington, DC 20375.
Douglas B. Chrisey
Affiliation:
Code 6674, Naval Research Laboratory, Washington, DC 20375.
Get access

Abstract

Control of composition and phase of a series of MoNx thin films has been accomplished by reactive pulsed laser deposition (PLD). Molybdenum foil targets were ablated in a background gas of N2/H2 (10%) at pressures ranging from 40 to 120 mTorr. the MoNx films were deposited simultaneously onto (100) MgO and fused silica substrates. the films were characterized by X-ray diffraction (XRD), temperature-dependent resistivity, and Rutherford backscattering spectroscopy (RBS). the composition, phase, and electronic transport properties were found to depend on N2/H2 pressure, substrate temperature, and substrate orientation. the highest superconducting transition temperature (Tc ) was observed in a hexagonal Mo2N film where Tc (onset) ≈ 8 K. IN general, Tc was observed to correlate most closely with the N/Mo ratio. as the ratio of N/Mo increased above optimal M02N composition, Tc decreased. Films grown on MgO generally had higher N/Mo ratios and hence lower Tc values than films deposited on silic A.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable