Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T12:21:38.341Z Has data issue: false hasContentIssue false

Hall effect measurements at low temperature of arsenic implanted into 4H-silicon carbide

Published online by Cambridge University Press:  15 March 2011

J. Senzaki
Affiliation:
Ultra-Low Loss Power Device Technologies Research BodyElectrotechnical Laboratory
K. Fukuda
Affiliation:
Ultra-Low Loss Power Device Technologies Research BodyElectrotechnical Laboratory
Y. Ishida
Affiliation:
Ultra-Low Loss Power Device Technologies Research BodyElectrotechnical Laboratory
Y. Tanaka
Affiliation:
Ultra-Low Loss Power Device Technologies Research BodyElectrotechnical Laboratory
H. Tanoue
Affiliation:
Ultra-Low Loss Power Device Technologies Research Body
N. Kobayashi
Affiliation:
Ultra-Low Loss Power Device Technologies Research BodyElectrotechnical Laboratory
T. Tanaka
Affiliation:
Ultra-Low Loss Power Device Technologies Research BodyR&D Association for Future Electron Devices, c/o Electrotechnical Laboratory 1204, 1-1-4, Umezono, Tsukuba, Ibaraki, 305-8568, JAPAN
K. Arai
Affiliation:
Ultra-Low Loss Power Device Technologies Research BodyElectrotechnical Laboratory
Get access

Abstract

The arsenic dose dependence of electrical properties for implanted samples at 500°C and subsequently annealed at 1600°C for 30min has been investigated to derivate the activation energies of the arsenic donors in silicon carbide. Hall effect measurements were performed between 20K and 773K. Hall carrier concentration of implanted sample with high dose of 7×1015 cm−2 is independence of temperature, which indicates the formation of implanted layer with metallic conduction. For the sample with low dose of 1×1014 cm−2, the experimental Hall mobility varies directly as T3/2 below 80K and as T−3/2 above 150K. The activation energies of arsenic donors determined from the implanted sample with low dose using a least-squares fit of the charge neutrality equation are 66.8 meV for hexagonal site and 127.0 meV for cubic site, respectively.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable